Thread
:
Oil line
View Single Post
06-29-2018, 11:08 AM
#
10
alanwoodieman
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,985
Re: Oil line
if it is in the machine shop take a steel coupling and drill a hole thru the pan and weld the coupling into it and then you can run a hard line to that, if you prefer going into the timing cover then PM me for some more help
alanwoodieman
View Public Profile
Send a private message to alanwoodieman
Find More Posts by alanwoodieman