The Ford Barn - View Single Post - Sport Coupe Resurrection

40 Deluxe · 06-06-2018, 11:55 PM

Rather than trying to vacuum the debris out, find a blow gun with a threaded tip. Get a short length of 3/16" brake line, cut one end off and squeeze down to a narrow slot. Thread the other end onto the blow gun and bend so that it reaches the bottom of the cylinder through the plug hole and blast sway.

06-06-2018, 11:55 PM	#8
40 Deluxe Senior Member Join Date: May 2010 Location: now Kuna, Idaho Posts: 3,818	Re: Sport Coupe Resurrection - Debris in Bores Rather than trying to vacuum the debris out, find a blow gun with a threaded tip. Get a short length of 3/16" brake line, cut one end off and squeeze down to a narrow slot. Thread the other end onto the blow gun and bend so that it reaches the bottom of the cylinder through the plug hole and blast sway.