The Ford Barn - View Single Post

kimeccles · 04-22-2018, 07:45 PM

Thanks I did read that and there was a lot of info, but I still am not sure.

I have the 1930 type cowl light with the riveted socket on the top part of the picture. It says the lens is clipped on the rim, but if you do that and then put the gasket on it does not look right. If I try to put the lens first then gasket and then reflector and try to snap it all, it is really tight. I am just not sure.

thanks

04-22-2018, 07:45 PM	#3
kimeccles Senior Member Join Date: Jul 2017 Location: Spokane, Washington state Posts: 262	Re: cowl light install sequence? Thanks I did read that and there was a lot of info, but I still am not sure. I have the 1930 type cowl light with the riveted socket on the top part of the picture. It says the lens is clipped on the rim, but if you do that and then put the gasket on it does not look right. If I try to put the lens first then gasket and then reflector and try to snap it all, it is really tight. I am just not sure. thanks