Re: 28 RPU Back Cab Bracket Question
Hi,
My RPU was also rebuilt from old and new parts by the previous owner.
Unfortunately that area was painted with underbody goop and covered with household underfelt.
I have attached a photo and highlighted the bracket with a Tippex marker. The bracket is riveted to a steel girder which seems to be part of the seat riser. The arrow points to where the LH bracket seems to be welded to the floor plate. The RH bracket is not welded.
__________________
Regards
Chris
Cape Town
28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC
Last edited by Floats; 04-10-2018 at 02:07 AM.
Reason: Added photo
|