Re: Head Gasket
Quote:
Originally Posted by CT Jack
Graphite doesn't bond. It is an excellent high temperature lubricant. If your head is in good condition, flat and not warped, and without cracks I would recommend using a copper gasket. The key to making a Model A gasket not leak is to torque, torque, and retorque the head frequently after installation. Doing this is key to preventing leaking.
|
A while back, someone here said they check the tension on the head studs at each service. I have adopted that regime and so far, so good. It only takes a few minutes but a blown gasket can be a real PITA.
__________________
I sometimes wonder what happened to the people who asked me for directions.
Even at my age, I still like to look at a young, attractive woman but I can't really remember why.
|