Quote:
Originally Posted by tubman
Are you referring to the same Speedway stainless steel "center dump" headers I was referring to? Mine were in the original box and the fasteners and gaskets were in sealed bags as well. They were advertised as "new in the box" and they sure looked like it. Someone MAY have substitued sealed bags of fasteners, and gaskets, but I think that is highly unlikely. The fact remains that they DID NOT fit with out enlarging several bolt holes. The bottom holes on the center exhaust port were especially problematic.
The most likely situation is that my headers were issued early on and Speedway became aware of the problems and corrected them. I certainly hope that's the case.
|
No mine were not the stainless ones, nor were they center dump type. I only commented because you bought yours on the secondary market and I wanted to let you know how mine came packaged right from Speedway. It's possible that Speedway buys those headers from someone else and all they do is sell them the way they come from the manufacturer. Not making excuses for them as they should check to make sure all is correct before they sell them.