The Ford Barn - View Single Post

ford38v8 · 02-07-2018, 06:01 PM

Chris, There are just a couple differences to consider: One is the third hole (heat riser) in the 1937 carb mount, which is not compatible with the use of a 94 carb. The other is the diameter of the vacuum port for the Trico wiper motor.

02-07-2018, 06:01 PM	#2
ford38v8 Senior Member Join Date: Jul 2011 Location: SF Bay Area Posts: 7,283	Re: Intake Manifold Swap Chris, There are just a couple differences to consider: One is the third hole (heat riser) in the 1937 carb mount, which is not compatible with the use of a 94 carb. The other is the diameter of the vacuum port for the Trico wiper motor. __________________ Alan