The Ford Barn - View Single Post

justold · 12-12-2017, 09:02 AM

If you have low compression on a fresh rebuild the cylinders are dry , put a few cc of oil in each cylinder before trying to start it [ the cylinders are most likely washed down from from trying to start it ] .

12-12-2017, 09:02 AM	#43
justold Member Join Date: Jan 2013 Posts: 57	Re: Rebuilt Flathead Problems. If you have low compression on a fresh rebuild the cylinders are dry , put a few cc of oil in each cylinder before trying to start it [ the cylinders are most likely washed down from from trying to start it ] .