Re: 1949 Mercury Coupe - Door Lock Rod
It is installed from inside the door before any door panel or garnish molding is installed.
It is installed into the hole while being held horizontally, then lifted to its vertical position.
It is not lowered through the hole atop the door.
It may be possible to position it forward enough through the top of the door (without garnish molding in place) to get it past the retainer tab.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 11-02-2017 at 07:55 AM.
|