The Ford Barn - View Single Post

RawhideKid · 09-04-2017, 01:22 PM

Hey Rusty, if that fails, try holding the rod upside down, then heat from top down until about 4 inches from the ball, and as it cools lay a candle against the rod to let the wax drain down into the threads. Be sure to let it cool naturally, no aid.

Then use one of the belt wrenches.

09-04-2017, 01:22 PM	#7
RawhideKid BANNED Join Date: Apr 2017 Location: Lower Left Coast Posts: 469	Re: Removing stuck shift lever knob Hey Rusty, if that fails, try holding the rod upside down, then heat from top down until about 4 inches from the ball, and as it cools lay a candle against the rod to let the wax drain down into the threads. Be sure to let it cool naturally, no aid. Then use one of the belt wrenches. __________________ Before Walmart you had to buy a ticket to the fair to see a bearded lady!