The Ford Barn - View Single Post

deuce lover · 08-28-2017, 11:46 AM

IMO pull out the tubes ,seal around the rivets with good silicone and use the correct valve stem.Done this several times(with radials) with no problems.I don't imagine that bias tubless would give you problems.

08-28-2017, 11:46 AM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,837	Re: Tubeless bias on stock rim IMO pull out the tubes ,seal around the rivets with good silicone and use the correct valve stem.Done this several times(with radials) with no problems.I don't imagine that bias tubless would give you problems.