Re: Brake Buddy Adjustment
Fellow "A"rs.
I took the 2 fronts completely again and hers what I found.
1. The wedge system was an assortment of parts. some stock some of that Flathead Teds kit. [I could never get that stuff to work right]. This was causing all kind of
problems. I have ordered all new original design stuff and I'm sure that will fix most of the issues.
2. The adjuster was pretty worn so a new one is on its way.
3. there was a lot of grease on the moving parts which had harden with age which didn't allow the parts to move easily. I was told by a model A expert you should only use oil on moving brake parts
I'll post what happens when it is back together and set up right.
Thanks for the help on this project, Steve
|