The Ford Barn - View Single Post

50fordcoupeman · 08-17-2017, 12:50 AM

Thanks Dave. Yes you are correct on the driveshaft. By observation I suspect the front end of the driveshaft was modified. I will check again to see how much is sticking out. If I remember correctly the pipe part of the yoke slid in almost flush with external part of the seal.
Thanks again!!

08-17-2017, 12:50 AM	#5
50fordcoupeman Senior Member Join Date: Mar 2016 Location: LaGrande Oregon Posts: 874	Re: Vibration Thanks Dave. Yes you are correct on the driveshaft. By observation I suspect the front end of the driveshaft was modified. I will check again to see how much is sticking out. If I remember correctly the pipe part of the yoke slid in almost flush with external part of the seal. Thanks again!!