The Ford Barn - View Single Post

40 Deluxe · 08-14-2017, 04:29 PM

Yes, there IS a bushing on the other side of that seal. There should be very little up and down play in the yoke. This was a very common wear point back in the day. There were special tools made to replace that bushing without pulling the extension housing off. Make sure your yoke is not worn. The outer diameter should be smooth, no scoring.

08-14-2017, 04:29 PM	#2
40 Deluxe Senior Member Join Date: May 2010 Location: now Kuna, Idaho Posts: 3,818	Re: Vibration Yes, there IS a bushing on the other side of that seal. There should be very little up and down play in the yoke. This was a very common wear point back in the day. There were special tools made to replace that bushing without pulling the extension housing off. Make sure your yoke is not worn. The outer diameter should be smooth, no scoring.