The Ford Barn - View Single Post

30 Tudor · 07-26-2017, 12:10 PM

Run a compression check to eliminate mechanical possibilities.
I have seen new parts that are wrong on occasion.

Start there, then go to spark,and spark timing, a can of ether will cover the volatiles.

07-26-2017, 12:10 PM	#15
30 Tudor Member Join Date: Apr 2016 Location: Idaho Posts: 95	Re: Will not start after engine rebuild Run a compression check to eliminate mechanical possibilities. I have seen new parts that are wrong on occasion. Start there, then go to spark,and spark timing, a can of ether will cover the volatiles.