View Single Post
Old 07-26-2017, 11:36 AM   #11
tinkirk
Senior Member
 
tinkirk's Avatar
 
Join Date: Jul 2015
Location: SouthWest Michigan
Posts: 366
Default Re: Will not start after engine rebuild

Quote:
Originally Posted by Jim/TX/GA View Post
As a quick test, instead of trying to start with the spark lever up, pull it down. If the initial ignition timing has accidentally been set very retarded, this might get it back into the range where it will at least start.

also some Gav's have to be opened more than others, so try opening it one full turn and see what happens because it sure sounds like it is gas related

Tinkirk/Terry
tinkirk is offline   Reply With Quote