Thread: Jack Stands
View Single Post
Old 07-22-2017, 02:57 PM   #9
H. L. Chauvin
Senior Member
 
Join Date: May 2010
Posts: 4,179
Default Re: Jack Stands

FWIW:

After reading on another non-Model A vehicle Forum about one (1) Chinese cast iron rachet tooth shearing off ........ and allowing the vehicle to fall, I only crawl under all steel jack stands with steel pins.

Tom:

Also, after some thought, appears that a cheap 3 legged jack stand holding up someone's Chamber Pot would seem even be a bit less trustworthy ........... not to mention the aftermath. LOL
H. L. Chauvin is offline   Reply With Quote