[Henry's Lady's Man]

Did the final touches on putting Bonnie back together after putting in the correct tappets (actual solid '32 tappets) for the B cam I installed a year ago. I had the skinniest base (0.990" aftermarket adjustable) tappets riding on the B's lobes which Henry redesigned for a 1.187" base on a solid lifter. Believe me, grinding valve stems to get the right lash is pure joy.
With a full time job, she went back together slowly, and tonight, I reinstalled the front bumper, splash apron, and hood. My short wife had fun reaching over the hood with a screw driver whilst I spun the nuts on the two bolts from under the dash for the back hood bracket.