Re: 29 CCPU window channel install
Hello Ed,
I took the pictures I posted. They are of my 82-A project. If you can't find the lower clips, then using a screw to hold the runs sounds like it will work. I had not thought of that option. The screws would need to be removed if ever the glass needs to be removed. I think that gluing the runs is a bad idea.
I glued the rubber bumper to the brackets inside of the door. I used the glue which came with the set of runs. I used a "C" style vice grip to clamp the bumpers while the glue was drying. Time will determine if this was a good idea.
FYI - Attached is a picture showing an original door glass channel assembly with the weather strip installed.
|