Re: Valve Adjustment
As mentioned above, remove the intake/exhaust manifolds, remove valve chamber cover, and adjust using very thin wrenches. Craftsman, Mac, Snap On, and others make valve adjustment wrenches just for this purpose.
If you number the valves from front of motor being #1 and rear of motor being #8, then-
When 1 and 6 are down, adjust 3 and 8.
When 2 and 4 are down, adjust 5 and 7.
When 3 and 8 are down, adjust 1 and 6.
When 5 and 7 are down, adjust 2 and 4.
|