The Ford Barn - View Single Post

Tom Wesenberg · 01-23-2011, 01:43 PM

You must have the multiplate flywheel, which doesn't have clearance for the spring mounting bolts and lock washers used on the 5/8" drive.

You'll need to use the original Abell drive, or the 1/2" replacement for it, called the "SERVICE DRIVE", as explained in the SERVICE BULLETINS.

01-23-2011, 01:43 PM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Starter drive issue You must have the multiplate flywheel, which doesn't have clearance for the spring mounting bolts and lock washers used on the 5/8" drive. You'll need to use the original Abell drive, or the 1/2" replacement for it, called the "SERVICE DRIVE", as explained in the SERVICE BULLETINS.