Re: Angle of Brake Arms
When you get the front brakes apart i think you will see that Mike is correct.
With the original operating wedge and operating pin the cam on the actuating arm will not even begin to move the operating pin until the lever is near 15° or even vertical...
The "pills" that fit into the wedge help you set this angle by effectively adding length to the operating pin
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62
Last edited by 1955cj5; 05-22-2017 at 09:15 AM.
|