The Ford Barn - View Single Post

Bruce Adams · 04-09-2017, 10:58 PM

I did not notice where anyone mentioned putting one nut on top of another as a stopper, tighten and turn the bottom one. MAaybe its assumed everyone knows that is how its done so it was not mentioned.

Sorry, I re-read and someone mentioned "Double Nutting" which is a good name for the technique.

04-09-2017, 10:58 PM	#10
Bruce Adams Senior Member Join Date: May 2010 Location: Northport, NY Posts: 1,597	Re: replacing head studs I did not notice where anyone mentioned putting one nut on top of another as a stopper, tighten and turn the bottom one. MAaybe its assumed everyone knows that is how its done so it was not mentioned. Sorry, I re-read and someone mentioned "Double Nutting" which is a good name for the technique.