Quote:
Originally Posted by Ben Umberger
Greetings,
I am working on a 29 and and when it came to me it had a 1/2" belt which sits lower in the pulleys.
When I replaced it with a 5/8" (standard Model A) it rubs the radiator inlet hose so I put back a 1/2" belt.
The question is can anyone tell me since the belt sits lower in all of the pulleys is the fan speed unchanged, faster or slower?
I do have an over heating problem which I think is actually a new (used) radiator but the fan speed question bugs me.
Thanks
|
Fan speed is not your problem. You should be able to drive down the road with out a fan with no problem. You need the fan for stop and go traffic, or idling.