The Ford Barn - View Single Post

redmodelt · 03-20-2017, 01:58 PM

There is no set this is how direction. If you can't spin the axles when the two half's are bolted together then it to tight, if you have a large amount of back and fourth slop then it too loose.

03-20-2017, 01:58 PM	#3
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,408	Re: differential question There is no set this is how direction. If you can't spin the axles when the two half's are bolted together then it to tight, if you have a large amount of back and fourth slop then it too loose. __________________ I know the voices aren't real but damn they have some good ideas!