View Single Post
Old 02-20-2017, 06:26 PM   #9
duke36
Senior Member
 
Join Date: Jun 2015
Posts: 1,414
Default Re: Door or Window crank handle removal 160A, B, C late 68B & 68C & others

Sorry you had to cut off the escut. the pins shouldn't be longer than the shaft dim. My car had cut nails as pins that weren't dressed properly !
Have seen many (original) cars with something like a dried roofing mastic on the inside of outer door skins probably as a noise attenuator, given that water gets inside the doors.
Re: your window slop, perhaps check the "rollers" that slide in the lower window tracks for wear in addition to other suggestions. Should be more BARN posts on this subject.
duke36 is offline   Reply With Quote