The Ford Barn - View Single Post

37 truck · 01-17-2017, 11:32 AM

Thanks for all the response, I am looking for the throttle ball linkage part that goes on the passenger side, if anyone has one. Short of that I can go to a linkage on the drivers side, which I would rather not do, or go to Stromberg 97's as Charlie suggested. I would have to go with extended throttle shafts on the 97's, or use a linkage between the carbs with a stock ball joint in the middle. I have the 94's and the one 97 currently.

01-17-2017, 11:32 AM	#10
37 truck Senior Member Join Date: Jul 2011 Location: Omak, Washington Posts: 249	Re: Switching to two carbs Thanks for all the response, I am looking for the throttle ball linkage part that goes on the passenger side, if anyone has one. Short of that I can go to a linkage on the drivers side, which I would rather not do, or go to Stromberg 97's as Charlie suggested. I would have to go with extended throttle shafts on the 97's, or use a linkage between the carbs with a stock ball joint in the middle. I have the 94's and the one 97 currently.