The Ford Barn - View Single Post

JDupuis · 01-10-2017, 10:15 AM

Marty, try steam. Hold the panel above a boiling kettle. Allow the steam to condensate but not saturate. Then lay flat with the needed weights again. Allow to dry for a day or more. The steam will help penetrate some moisture back into the chip board.
This is also the same thing I do to reshape and restore old Fedora Hats.
Hope this helps. Jeff

01-10-2017, 10:15 AM	#2
JDupuis Senior Member Join Date: Jan 2017 Location: Maryhill Ont Canada Posts: 834	Re: Kick panels Marty, try steam. Hold the panel above a boiling kettle. Allow the steam to condensate but not saturate. Then lay flat with the needed weights again. Allow to dry for a day or more. The steam will help penetrate some moisture back into the chip board. This is also the same thing I do to reshape and restore old Fedora Hats. Hope this helps. Jeff __________________ Let's let pylons, be pylons!