Quote:
Originally Posted by aermotor
Thanks Randy, What all has to come apart to get that little gap? Not sure a couple drips a week will be worth it.
John
|
I think I removed the radius rod bolt from the transmission end and then loosened the flange bolts. It was tough to get much of a gap. I cleaned it with brake cleaner then I pressed as much Permatex as I could into the gap before using the floss.
Farmer fix for sure...but it's worked so far.
But there is a little more to it. I have since replaced the transmission. It had a 4-speed in it which leaked enough that it dripped from the u-joint clam and the speedo turtle, so the oil may have been coming from there and working it's way down the torque tube.