12-20-2016, 10:15 PM
|
#27
|
|
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: Has anyone received the new Judging Standard?
Quote:
Originally Posted by Jim/TX/GA
FYI, the following was posted on the MAFCA home page regarding this:
New Release of Restoration Guidelines
December 17 - The long awaited Revision 4 to the Restoration Guidelines & Judging Standards was on its way to the MAFCA office when a mistake was discovered. The revision was not three-hole punched and rather than send our members a defective product, the truck was turned around and is going back to Michigan.
The RG&JS are shrink wrapped so the printer will need to open each package, three-hole punch them and reshrink wrap the book. This will take some time and delay our receipt of the new RG&JS until January. Both MARC and MAFCA apologize to the Model A community for the delay. This one was beyond our control. The printer is assuming full responsibility.
Doug Clayton, Publications Director
======================================
|
Total incompetence on the part of all involved. Talk about a Mickey Mouse organization! Wayne
|
|
|