The Ford Barn - View Single Post

Glenn C. · 12-09-2016, 01:51 PM

You may find that the plunger bore diameter in the front timing gear cover is wore beyond a useable limit. The plunger flops around in the bore while running. Possibly someone else might know the tolerances.

12-09-2016, 01:51 PM	#69
Glenn C. Senior Member Join Date: May 2010 Location: Didsbury Alberta Posts: 838	Re: Camshaft timing gear rattling noise You may find that the plunger bore diameter in the front timing gear cover is wore beyond a useable limit. The plunger flops around in the bore while running. Possibly someone else might know the tolerances.