The Ford Barn - View Single Post

Ol' Ron · 11-10-2016, 11:07 PM

I make a bushing the size of the crankshaft flange. This allows me to bolt 2 flywheels together (fords) This way tou can transfer the holes from a 9 or 10 inch bolt pattern to the 11 in flywheel. Have done this on may wheels.

11-10-2016, 11:07 PM	#7
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,913	Re: 11" clutch with a 3 speed? I make a bushing the size of the crankshaft flange. This allows me to bolt 2 flywheels together (fords) This way tou can transfer the holes from a 9 or 10 inch bolt pattern to the 11 in flywheel. Have done this on may wheels.