The Ford Barn - View Single Post - Need a part ID, name and hopefully a source please

41woodie · 11-09-2016, 02:08 PM

Part is for a '41 woodie but I think any '41 model and possibly up to '48 will work. On the drivers side along the seam between the top of the front inner fender and the fender itself are a series of carriage bolts that fasten the two pieces together. On some or all of these bolts is a piece of flat sheet metal bent in a U shape that are used to secure the hood pull cable to the fender and keep it from flopping around.
Can anyone help with the correct nomenclature, Ford part number or even better a source for these cable clips. Thnx

11-09-2016, 02:08 PM	#1
41woodie Member Join Date: Oct 2010 Location: Oklahoma City, Ok. Posts: 31	Need a part ID, name and hopefully a source please Part is for a '41 woodie but I think any '41 model and possibly up to '48 will work. On the drivers side along the seam between the top of the front inner fender and the fender itself are a series of carriage bolts that fasten the two pieces together. On some or all of these bolts is a piece of flat sheet metal bent in a U shape that are used to secure the hood pull cable to the fender and keep it from flopping around. Can anyone help with the correct nomenclature, Ford part number or even better a source for these cable clips. Thnx