Re: Ford Flathead DUI (distributor)
No experience - but my guess is that it will work just fine (as long as you ensure that it will work with your water pumps and fan/belt configuration). It is important that it has an advance curve and system that is designed for a flathead and your particular induction system - hopefully it is 'tuneable' in these areas and they know how to help you set it up (both mechanical and vacuum advance setups).
Yes - to many it is 'big and ugly' . . . but you have your own eyes and that is an aesthetic/personal opinion anyway.
Most of us 'traditionalists' would not run it - mainly because it does not have a 'vintage' look in our eyes. Same deal with a GM alternator adapted to the stock generator position. Many of these 'upgrades' are supplied from good manufacturers who produce quality products . . . so I have no negative comments about them (other than looks that don't match my tastes).
If you like the capabilities of a DUI ignition, it fits your engine and you can afford it - I say go for it. Report back to us all how well it works . . . always more to learn.
Take care,
B&S
|