The Ford Barn - View Single Post

Carb Guy · 09-10-2016, 12:45 PM

I made my own several years ago, just took a 3/8" deep socket and carefully filed it down to 13/32", works just fine and I use a lot to rebuild carburetors.

09-10-2016, 12:45 PM	#22
Carb Guy Senior Member Join Date: May 2010 Location: Wisconsin Posts: 186	Re: Where are the GAV Wrench's I made my own several years ago, just took a 3/8" deep socket and carefully filed it down to 13/32", works just fine and I use a lot to rebuild carburetors.