View Single Post
Old 08-23-2016, 02:53 AM   #13
david.skinner
Member
 
david.skinner's Avatar
 
Join Date: Apr 2015
Location: Wellington NZ
Posts: 85
Default Re: Need help to set idle

Hi Phil, yes good advice. Yes the vacuum is way low - around 14". I went through my old notes and I had run a vacuum test before which I noted "steady just below the green" and the green on my gauge starts at 20. I also have a spare distributor from skip which I can change to. I pretty much want a spare of everything
david.skinner is offline   Reply With Quote