The Ford Barn - View Single Post

Joe Immler · 07-28-2016, 06:19 PM

Basically if it has a grease fitting,grease it;a plug, such as the trans and rear end,fill it with correct oil until it reaches the bottom of the hole. I use 3in1 electric motor oil in the generator and distributor. Your lube chart should tell what lube to use.
Any more questions and concerns let us know. That is what this wonderful site and guys are here for. (I mean the others. I'm not wonderful.)

07-28-2016, 06:19 PM	#3
Joe Immler Senior Member Join Date: Dec 2012 Location: Massillon, Ohio Posts: 783	Re: Lube points and proceedure Basically if it has a grease fitting,grease it;a plug, such as the trans and rear end,fill it with correct oil until it reaches the bottom of the hole. I use 3in1 electric motor oil in the generator and distributor. Your lube chart should tell what lube to use. Any more questions and concerns let us know. That is what this wonderful site and guys are here for. (I mean the others. I'm not wonderful.)