Quote:
Originally Posted by 1931flathead
my boss has a 671 on a chevy sbc but they have plates weld to the intake to hold it down been on there for years
|
Dude, do want you want to, but you've asked. I'd be very surprised that your boss just welded a plate on top of 4 bbl. intake
without opening up the hole and then welding his plate to the intake after opening up the intake.
If that's your plan, then go for it, but your you weren't specific in your original question.
Putting a roots-type blower on a 4bbl intake
without (again-without machining is the crucial part here) machine work defeats the entire purpose of running a blower since you are choking off a good portion of the charge.
I think 'Ol Ron made a blower intake by machining off the top of a Fenton intake and welding a plate to it.