Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Fordors
Just wondering, how much would you like to see the intake valve angle changed? What would be done to compensate for the out of parallel between the deck and the valve seat, would a "mini-relief" so to speak, be required? What else would need to be corrected/changed?
|
Good questions and thank you for asking.
Yes moving the intake valve over towards the cylinder margin would require a minor notch or "relief" since (you're right) the valve head would no longer be parallel with the deck.
Imagine looking up through the cylinder from the bottom and actually being able to see the edge of the valve at or near max lift.
This, I feel would require a lifter bore machined inline with the valve stem. In other words the lifter bores would be staggered from intake to exhaust.
I realize this sounds a little "out of the box" but I don't think it's out of the realm of realistic possibility.