The Ford Barn - View Single Post

redmodelt · 07-05-2016, 09:26 PM

The arm would use the tapered splined pin (first photo above). When you install have a second set of hands hold an anvil under the arm so you don't fracture the case. Drive it in from the top. Just installed one of the modern type last Friday.

07-05-2016, 09:26 PM	#11
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,408	Re: clutch release shaft arm broke The arm would use the tapered splined pin (first photo above). When you install have a second set of hands hold an anvil under the arm so you don't fracture the case. Drive it in from the top. Just installed one of the modern type last Friday.