Quote:
Originally Posted by Ol' Ron
Henry
Do you have a flow bench? I Built a home made on which I published the results in my book. Later I had access to a digital one which measured CFM, These thisga will break your heart. For one thing the exhausr is not the issue. If you can't get it in, you don't have to worry abput getting it out, Blower motors don't seen th have any trouble. I agree with you on the intake tho.
|
Not that worried about the exhaust Ron. Don't have a flow bench but I have done some illustrative flow testing with smoke and dry power introduced into the air flow.
My exhaust mods are more to create a less turbulent environment thereby reducing the chance for creating hot spots in the flow "eddys" that now exist in the end exhaust ports.