The Ford Barn - View Single Post

tubman · 06-25-2016, 11:27 AM

Hey Ron! Thanks for "making a market" for my old crank! You know I'm building my own 258". Almost the same as you're talkin' about : Isky Max-1, Edmunds heads with improved "squish" and extended tip plugs, Navarro "Universal" manifold with 2 94's (to start), and an old Mallory "flattop" distributor and "The Best Coil I Ever Made". As you can see, I'm going for an "old-timey" look. Because of the smokin' deal I got on a set of pistons from Speedway's garage sale section, I expect to be in it for less than $2000. We'll see.

06-25-2016, 11:27 AM	#10
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 11,623	Re: Could Edelbrock cast a flathead block Hey Ron! Thanks for "making a market" for my old crank! You know I'm building my own 258". Almost the same as you're talkin' about : Isky Max-1, Edmunds heads with improved "squish" and extended tip plugs, Navarro "Universal" manifold with 2 94's (to start), and an old Mallory "flattop" distributor and "The Best Coil I Ever Made". As you can see, I'm going for an "old-timey" look. Because of the smokin' deal I got on a set of pistons from Speedway's garage sale section, I expect to be in it for less than $2000. We'll see.