The Ford Barn - View Single Post

Ol' Ron · 06-25-2016, 11:03 AM

Yepadoodle!! That's the way it's done. Sportsman racing rules said 1/8 0ver bore stock crank and valves any cam one carb. A 258 block 400jr cam. 2GC carb, fixed IGN atrt 17 degs and go racing. Set em up loose. I knew a fellow that would buy a Sears rebuild ($139) put in a cam and run a season on it. put the stock cam back in it, and get another one.

06-25-2016, 11:03 AM	#8
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,985	Re: Could Edelbrock cast a flathead block Yepadoodle!! That's the way it's done. Sportsman racing rules said 1/8 0ver bore stock crank and valves any cam one carb. A 258 block 400jr cam. 2GC carb, fixed IGN atrt 17 degs and go racing. Set em up loose. I knew a fellow that would buy a Sears rebuild ($139) put in a cam and run a season on it. put the stock cam back in it, and get another one.