The Ford Barn - View Single Post

Ol' Ron · 06-24-2016, 01:16 PM

My eyesight was a little better. Yes I bought Offy 400 heads because they were thicker thicker than to older heads and I could make my own chamber. This was before CNC. I could knock off a set of heads in a day. Yes the base price was 2700 less intake and dist. I dynowed every one with my intake and dist. sold allot of SBC distributors, only had mechanical adv. It' nice to know several are still running.

06-24-2016, 01:16 PM	#1
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,985	Re: Could Edelbrock cast a flathead block My eyesight was a little better. Yes I bought Offy 400 heads because they were thicker thicker than to older heads and I could make my own chamber. This was before CNC. I could knock off a set of heads in a day. Yes the base price was 2700 less intake and dist. I dynowed every one with my intake and dist. sold allot of SBC distributors, only had mechanical adv. It' nice to know several are still running.