View Single Post
Old 06-22-2016, 05:08 AM   #2
Bassman/NZ
Senior Member
 
Bassman/NZ's Avatar
 
Join Date: May 2010
Location: Napier, New Zealand
Posts: 2,001
Default Re: Update on burning points.

Quote:
Originally Posted by Brian View Post
Marty, I'm finding your little saga here quite interesting; Didn't you get Bubba to build up that distributor? Doesn't he use some 'special' condenser in his builds? What has he had to say about it all? I'm not throwing stones, just asking what I consider to be valid questions.
Incidently, I use those Bosch condensers for a Skyline, available at Supercheap stores...they have the same capacitance...
Hiya Brian. Hope all is well. Yes, Bubbas did do that dissy. It was my fault because of wiring the coil back to front, so I am casting no aspersions whatsoever. I still have the condensor from Bubbas, I only put a new one on because I had it in pieces. I'll save Bubba's one for a spare, or maybe put it back on one day.
Bassman/NZ is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)