The Ford Barn - View Single Post

Heard · 06-18-2016, 05:58 PM

Lawson, I'm in the process of removing the cab on my '35 right now. Looking at the very front of the cab from inside the engine bay, my cab is almost sitting on the frame rail. No way is it going to come down in the FRONT. Maybe 1/8" inch or so, but not much. Yours may be different and/or you may be wanting to lower the rear.

As far as jacking it up and sliding out the wood spacers....I would have to go look at this a little closer but it seems like it would be possible.

Heard

06-18-2016, 05:58 PM	#5
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	Re: Lifting cab on 35 PU Lawson, I'm in the process of removing the cab on my '35 right now. Looking at the very front of the cab from inside the engine bay, my cab is almost sitting on the frame rail. No way is it going to come down in the FRONT. Maybe 1/8" inch or so, but not much. Yours may be different and/or you may be wanting to lower the rear. As far as jacking it up and sliding out the wood spacers....I would have to go look at this a little closer but it seems like it would be possible. Heard __________________ Do I look like I have a plan B?