The Ford Barn - View Single Post

rjhink · 06-12-2016, 08:48 AM

Thanks for your replies! I was hoping that I was not the only one to have an issue. I did think of bringing the ring gear and Carrier set to the local machine shop or to a friend who has a 12 inch lathe to have the angle relieved on the back of the gear. Since it's already mounted on the carrier, they could use a live center on one and and chuck the other end. The ring and pinion set for the 35 and 36 rear end is a different part number, but without having one in hand, I don't know the subtle differences.

06-12-2016, 08:48 AM	#5
rjhink Junior Member Join Date: Feb 2016 Location: Yorktown, Virginia Posts: 12	Re: '34 ring/pinion (3.54 set) issues? Thanks for your replies! I was hoping that I was not the only one to have an issue. I did think of bringing the ring gear and Carrier set to the local machine shop or to a friend who has a 12 inch lathe to have the angle relieved on the back of the gear. Since it's already mounted on the carrier, they could use a live center on one and and chuck the other end. The ring and pinion set for the 35 and 36 rear end is a different part number, but without having one in hand, I don't know the subtle differences.