Quote:
Originally Posted by JSeery
Well, I'm not following this at all! How would lowering the pitman arm (heating and bending it) not improve the clearance with the radius rods? Seems like saying that bending the spindle arms won't help with clearance with a dropped axle. I'm missing something on this one!
Talking about an "s" shaped bend here, not just bending the end down. The bend would start right next to where it bolts to the steering box.
|
JSeery, you may be correct in your fix. But looking under the car the way I see it no matter how far down you bend pitman arm, the "arm" portion of the pitman will ultimately hit the wishbone as I continue to turn right another 3/4 turn of the steering wheel.