The Ford Barn - View Single Post

RichardW · 04-08-2016, 01:06 PM

The axles use 4-40 fillister head screws. I have found them but it takes a good hardware store. I usually use one a little longer so it doesn't tend to back out. A SMALL amount of locktite helps too.

04-08-2016, 01:06 PM	#5
RichardW Senior Member Join Date: May 2010 Location: Deer Park, Texas Posts: 100	Re: Hubley Screw Set The axles use 4-40 fillister head screws. I have found them but it takes a good hardware store. I usually use one a little longer so it doesn't tend to back out. A SMALL amount of locktite helps too.