[41woodie]

No problem with the two upper pieces that attach to the rear quarter posts. Also no problem with the "flap" that inserts in the groove on the bottom of the upper half and is held in place with a metal strip.
Perhaps I'm missing the metal insert that would normally hold the seal at the very bottom of the door but I don't see any holes where screws would have been. I'll check it out closer tomorrow. The ones that really have me stumped are the two flat strips that seal the sides of the lower gate. Each one has two cutout rectangles that don't seem to align with anything on the tailgate or quarter posts.
Can you explain in more detail where those pieces attach. Sorry to be a pest, thanks